Products >> Load Cells >> S-Type Load Cells

Submersible S-Beam Load Cell | IP68 Waterproof |

Product No.：20153251814
Online Inquiry

Designed for Permanent Long-Term Submersion to 10m/1bar

Ideal for Hydrostatic Testing and Off-Shore Applications

Hermetically Sealed – Ideal for Harsh Industrial Environments

Improved Accuracy – With our specially designed rod end bearings which reduce extraneous forces.

Fast and Simple Installation – With standard or customised mounting bases and design fixtures.

Capacities: 0-0.5kN up to 0-5kN

Output: 2mV/V ±0.1%

Hermetically Sealed

Fully Submersible IP68 Rated to 10m/1bar

Simple To Install

High Accuracy: <±0.02%/FS

TECHNICAL SPECIFICATIONS

Rated Capacity (RC)	kN	0-0.5, 0-1, 0-2, 0-5
Operating Modes	Tension/Compression / Tension & Compression
Sensitivity (RO)	mV/V	2 ± 0.1% (1±0.2% on 0.5kN capacity)
Pressure Sensitivity	%/FS/bar (metre)	<0.05 (<0.005)
Zero Balance/Offset	±%/Rated Output	5
Zero Return after 30 mins	±%/Applied Load	<0.02
Output Symmetry (tension vs. compression)	±%/Rated Output	<0.1
Non-Linearity	±%/Rated Output	<0.02
Hysteresis	% / Rated Output	<0.02
Repeatability	±%/Rated Output	<0.02
Temperature Effect on Zero	±%/Rated Output/˚C	<0.002
Temperature Effect on Sensitivity	±%/Rated Output/˚C	<0.001
Input Resistance	Ohms	1100 ± 50
Output Resistance	Ohms	1000 ± 2
Insulation Resistance	Megohms	>5000 @ 100Vdc
Excitation Voltage	Volts AC or DC	10 recommended (2-15 acceptable)
Operating Temperature Range	˚C	-40 to +80 (ATEX -40 to +60)
Compensated Temperature Range	˚C	-10 to +40
Storage Temperature Range	˚C	-40 to +80
Safe Overload	% of Rated Capacity	200
Ultimate Overload	% of Rated Capacity	300
Maximum Safe Side Load	% of Rated Capacity	30
Deflection @ Rated Capacity	mm	0.3 nominal
Fundamental Resonant Frequency*	Hz	see dimensional table
IP Rating (Environmental Protection)		IP68 up to 10m water depth/1bar
Weight (excluding cable)	kg	0.55
Fatigue Life		108 cycles typical (109 cycles on fatigue-rated version)
Cable Length (as standard)	metres	6m
Cable Type		Shielded, 4 conductor cable (AWG 24) Ø5mm, Cable jacket polyurethane (PUR)
Construction Material		17-4 PH Stainless Steel Body. 303 Stainless Steel (Cable Gland)
Resolution		1 part in 250,000 (with appropriate instrumentation)
*The resonant frequency is calculated with the body of the load cell attached to a large plate, ensuring that only the sensing element oscillates: This is vital to achieve the highest natural frequency and subsequent frequency response.